Progress in TMT M3 system
-
摘要:介绍30 m望远镜(TMT)的相关背景以及我国在TMT项目中承担的任务。从TMT三镜系统的总体要求出发,论述了三镜系统的两个主要部分(M3CA和M3PA)的具体要求、技术难点以及初步方案。针对M3CA,介绍了底支撑方案和侧支撑方案,采用Kinematic的底支撑方案时其面形精度RMS可以达到109.7 nm,SlopeRMS为0.95 rad,采用Kinematic的侧支撑方案时其面形精度RMS15 nm,一阶谐振频率等于17.7 Hz,均达到了设计要求。针对M3PA,介绍了Tilt轴系和Rotator轴系的方案。最后,简要介绍了三镜控制系统(M3CS)的要求和目标。Abstract:The background of Thirty Meter Telescope(TMT) and its mission that we should take in hand are introdced. The detailed specifications and the preliminary scheme for the M3CA and M3PA in the 3 mirror(M3) system are presented according to the general specification. Then, the two parts,axial support and lateral support of M3CA, are designed in detail. Due to the kinematic concept design used in both of axial support and lateral support, the mirror surface error can be reduced in a acceptable level. When the kinematic axial support scheme is taken, its surface accuracy RMS is 109.7 nm and Slope RMS is 0.95 rad, while the kinematic lateral support scheme is taken, its surface accuracy RMS is 15 nm,and the first natural frequency can reach to 17.7 Hz. The design proposal for M3PA is discussed and the control system for M3 system(M3CS) is introduced briefly.
-
Key words:
- Thirty Meter Telescope(TMT)/
- axial support/
- lateral support/
- Tilt axis/
- Rotator axis
-
[1] SIMARD L,CRAMPTON D,ELLERBROEK B,et al.. The TMT instrumentation program[J].SPIE,2010,7735:85187-85192. [2] STEPP L. Thirty Meter Telescope project update[J].SPIE,2012,8444:928006-928019. [3] NELSON J,SANDERS G H. The status of the Thirty Meter Telescope project[J].SPIE,2008,7012:788238-788245. [4] ELLERBROEK B L,ADKINS S M,ANDERSEN D R,et al.. TMT adaptive optics program status report[J].SPIE,2012,8447:927046-927054. [5] CHO M K. Performance prediction of the TMT tertiary mirror support system[J].SPIE,2008,7018:1-13. [6] SILVA D R.,ANGELI G,BOYER C,et al.. Thirty Meter Telescope:observatory software requirements, architecture, and preliminary implementation strategies[J].SPIE,2008,7019:789974-789992. [7] KAERCHER H J,EISENTRAEGER P,Süβ M. Mechanical principles of large mirror supports[J].SPIE,2010,7733:77332O. [8] 王富国,杨洪波,杨飞,等. 大口径主镜轴向支撑点位置优化分析[J]. 红外与 工程,2007,36(6):877-880. WANG F G,YANG H B,YANG F,et al.. Optimization and analysis for the axis support points position of the large aperture mirrors[J].Infrared and Laser Eng.,2007,36(6):877-880.(in Chinese) [9] 倪明阳,巩岩. 光刻投影物镜光学元件运动学支撑结构的设计与分析[J]. 中国光学,2012,5(5):476-483 NI M Y,GONG Y. Design and analysis of kinematic lens positioning structure in lithographic projection objective[J].Chinese Optics,2012,5(5):476-483(in Chinese) [10] 邵亮,杨飞,王富国,等. 1.2 m 轻量化SiC 主镜支撑系统优化设计[J]. 中国光学,2012,5(3):229-234S. SHAO L,YANG F,WANG F G,et al.. Design and optimization of supporting system for 1.2 m lightweight SiC primary mirror[J].Chinese Optics,2012,5(3):229-234.(in Chinese) [11] 范君柳,吴泉英,王福亮,等. Golay3望远镜系统的设计[J]. 光学 精密工程,2011,19(12):2877-2883. FAN J L,WU Q Y,WANG F L,et al.. Design of Golay 3telescope system[J].Opt. Precision Eng.,2011,19(12):2877-2883.(in Chinese) [12] 张景旭. 地基大口径望远镜系统结构技术综述[J]. 中国光学,2012,5(4):327-336. ZHANG J X. Overview of structure of technologies of large aperture ground based telescope[J].Chinese Optics,2012,5(4):327-336.(in Chinese) [13] 周超,杨洪波,吴小霞,等. 地基大口径望远镜结构的性能分析[J]. 光学 精密工程,2011,19(1):138-145. ZHOU CH,YANG H B,WU X X,et al.. Structural analysis of ground-based large telescopes[J].Opt. Precision Eng.,2011,19(1):138-145.(in Chinese).
点击查看大图
计量
- 文章访问数:2929
- HTML全文浏览量:583
- PDF下载量:779
- 被引次数:0