高精度光学对准测量装置的设计 -

姓名
邮箱
手机号码
标题
留言内容
验证码

高精度光学对准测量装置的设计

1.
中国科学院长春光学精密机械与物理研究所,吉林长春 130033;
2.
中国航天科工集团第二研究院206所,北京 100854

详细信息

作者简介:
耿天文(1980—),男,吉林长春人,硕士,助理研究员,主要从事光学测量仪器方面的研究。 E-mail:hero_gtw@yahoo.com.cn

中图分类号:TH741.14
计量
- 文章访问数:4576
- HTML全文浏览量:362
- PDF下载量:2032
- 被引次数:0
出版历程
- 收稿日期:2010-05-11
- 修回日期:2010-07-13
- 刊出日期:2010-10-25

Design of high-precision optical measuring centering device

1.
Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;
2.
No.206 Institute of the 2nd Academy of China Aerospace Science and Industry Corp.,Beijing 100854,China

摘要

摘要:设计了一套光学对准测量装置,该装置主要由面阵CCD相机、光学镜头、图像处理模块、LED红光光源、球面反光镜组成。介绍了测量原理,测量目标采用等腰三角形排列,通过面阵CCD对目标所反射的图像进行采集,由图像处理模块对该图像进行实时处理,能够同时得到X、Y、Z以及旋转角度等四维坐标数据。推导了光斑图像坐标和被测平面距离等计算公式,并进行了对准精度分析。结果表明,该装置位置误差＜1 mm,角度误差为0.24,实现了高精度、自动、快速对准测量。
- 光学对准/
- 测量装置/
- 四维坐标/
- 精度分析
Abstract:A set of optical measuring centering device is designed, which is composed of an area array CCD camera, an set of optical lens, image processing circuits, a red LED lamp-house, and a spherical surface reflector. The measuring principle of the device is introduced. The measuring objects are arranged in isosceles triangle, and the image of object is collected by a area array CCD and is processed in real time by the image processing circuits. At the same time, four dimension coordinate data(X,Y,X, and rotation angles) are calculated. The calculation expressions of the coordinate of spot image, the distance between the two planes and so on, are deduced and the measuring precision is analyzed. Experimental results indicate that the deviation of position is less than 1 mm and the deviation of angle is 0.24, which shows that the device can realize the high-precision, automatic and expeditiousness measurement.
- optical centering/
- measuring device/
- four dimension coordinate/
- precision analysis

HTML全文

参考文献 (1)

[1] 张文渊. 光学对准器快速对准方法简介[J]. 水道港口 ,2000,(1):43-44. ZHANG W Y. Brief Introduction on the fast centering methods of optical centering device[J].Channel and Port,2000,(1):43-44.(in Chinese) [2] 薛英武. 高精度光学自动对准系统的研究 . 武汉:湖北工业大学, 2007. XUE Y W. Research on the higher-precision optical automatic alignment system .Wuhan:Hubei University of Technology,2007.(in Chinese) [3] 李爱玲,张伯珩,边川平. 高速CCD图像采集存储系统的硬件设计[J]. 电子器件 ,2007,30(6):2145-2147. LI AI L,ZHANG B H,BIAN CH P. Design of high-speed CCD image data acquisition hardware system[J].Chinese J. Electron Devices,2007,30(6):2145-2147.(in Chinese) [4] 岳亮,李自田,李长乐,等. 基于DSP的视觉监测相机的图像处理系统[J]. 科学技术与工程 ,2006,6(16):2548-2551. YUE L,LI Z T,LI CH L,et al.. Image processing system of vision setecting camera based on DSP[J].Sci. Technol. Eng.,2006,6(16):2548-2551.(in Chinese) [5] TMS320VC33 DIGITAL SIGNAL PROCESSOR data sheet . Texas Instruments Incorporated,2000. [6] 张雄伟,曹铁勇.DSP芯片的原理与开发应用[M]. 北京:电子工业出版社,2000. ZHANG X W,CAO T Y.Principle and Application of DSP Chip[M]. Beijing:Publishing House and Electronics Industry,2000.(in Chinese) [7] 宋万杰,罗丰,吴顺君.CPLD技术及其应用[M]. 西安:西安电子科技大学出版社,1999. SONG W J,LUO F,WU SH J.Technology and Application of CPLD[M]. Xi'an:Xidian University Press,1999.(in Chinese) [8] 周中亮,周冰,何永强,等. 成像型探测系统中光斑精确定位方法研究[J]. 技术 ,2008,(3):248-251. ZHOU ZH L,ZHOU B,HE Y Q,et al.. Laser spot location in imaging laser detecting systems[J].Laser Technol.,2008,(3):248-251.(in Chinese) [9] 王和顺,陈次昌,黄惟公. CCD测量误差研究[J]. 光学技术 ,2009,(3):402-405. WANG H SH,CHEN C CH,HUANG W G. Research on the error of CCD[J].Opt. Technique,2009,(3):402-405.(in Chinese) [10] 张晖. 图像测量中亚像素定位技术研究[J]. 科技与生活 ,2009,(21):17-17. ZHANG H. Sub-pixel positioning technology research in image measurement[J].Technol. Live,2009,(21):17-17.(in Chinese) [11] 吴晓波,安文斗. 图像测量系统中的误差分析及提高测量精度的途径[J]. 光学精密工程 ,1997,5(1):133-144. WU X B,AN W D. Error analysing and approaches of improving measuring precision in image measuring system[J].Opt.Precision Eng.,1997,5(1):133-144.(in Chinese) [12] 费业泰.误差理论与数据处理[M]. 北京:机械工业出版社,2000. FEI Y T.Error Theory and Data Processing[M]. Beijing:China Machine Press,2000.(in Chinese)

施引文献

附加信息 (0)

访问统计