Citation: | CUI Li-ying, LU Yang, ZHONG Shuang-ling. Fabrication and optical properties of a ring-shaped colloidal photonic crystal[J].Chinese Optics, 2021, 14(6): 1348-1354.doi:10.37188/CO.2021-0107 |
[1] |
WANG J X, WANG L B, SONG L Y,
et al. Patterned photonic crystals fabricated by inkjet printing[J].
Journal of Materials Chemistry C, 2013, 1(38): 6048-6058.
doi:10.1039/c3tc30728j
|
[2] |
董贤子, 段宣明. 双光子三维微结构快速制备技术[J]. 光学 精密工程,2007,15(4):441-446.
DONG X Z, DUAN X M. High speed two-photon laser nanofabrication of three-dimensional microstructures[J].
Optics and Precision Engineering, 2007, 15(4): 441-446. (in Chinese)
|
[3] |
叶鑫, 倪锐芳, 黄进, 等. 自组装法制备的亚波长纳米多孔二氧化硅薄膜[J]. 光学 精密工程,2015,23(5):1233-1239.
doi:10.3788/OPE.20152305.1233
YE X, NI R F, HUANG J,
et al. Sub-wavelength nano-porous silica anti-reflection coatings fabricated by dip coating method[J].
Optics and Precision Engineering, 2015, 23(5): 1233-1239. (in Chinese)
doi:10.3788/OPE.20152305.1233
|
[4] |
毛小洁. 高功率皮秒紫外 器新进展[J]. 中国光学,2015,8(2):182-190.
doi:10.3788/co.20150802.0182
MAO X J. New progress in high-power picosecond ultraviolet laser[J].
Chinese Optics, 2015, 8(2): 182-190. (in Chinese)
doi:10.3788/co.20150802.0182
|
[5] |
冯迪, 赵正琪, 房启蒙, 等. 光子晶体光纤端面研磨损伤的分析[J]. 光学 精密工程,2017,25(11):2895-2903.
doi:10.3788/OPE.20172511.2895
FENG D, ZHAO ZH Q, FANG Q M,
et al. Analysis of end face damage in lapping for photonic crystal fiber[J].
Optics and Precision Engineering, 2017, 25(11): 2895-2903. (in Chinese)
doi:10.3788/OPE.20172511.2895
|
[6] |
杨晶, 龚诚, 赵佳宇, 等. 利用3D打印技术制备太赫兹器件[J]. 中国光学,2017,10(1):77-85.
doi:10.3788/co.20171001.0077
YANG J, GONG CH, ZHAO J Y,
et al. Fabrication of terahertz device by 3D printing technology[J].
Chinese Optics, 2017, 10(1): 77-85. (in Chinese)
doi:10.3788/co.20171001.0077
|
[7] |
李天琦, 毛小洁, 雷健, 等. 固体 器与光纤 器对光子晶体光纤棒耦合的分析与对比[J]. 中国光学,2018,11(6):958-973.
doi:10.3788/co.20181106.0958
LI T Q, MAO X J, LEI J,
et al. Analysis and comparison of solid-state lasers and fiber lasers on the coupling of rod-type photonic crystal fiber[J].
Chinese Optics, 2018, 11(6): 958-973. (in Chinese)
doi:10.3788/co.20181106.0958
|
[8] |
OZIN G A, YANG S M. The race for the photonic chip: colloidal crystal assembly in silicon wafers[J].
Advanced Functional Materials, 2001, 11(2): 95-104.
doi:10.1002/1616-3028(200104)11:2<95::AID-ADFM95>3.0.CO;2-O
|
[9] |
GU ZH Z, FUJISHIMA A, SATO O. Patterning of a colloidal crystal film on a modified hydrophilic and hydrophobic surface[J].
Angewandte Chemie International Edition, 2002, 41(12): 2067-2070.
doi:10.1002/1521-3773(20020617)41:12<2067::AID-ANIE2067>3.0.CO;2-Z
|
[10] |
SUN W, JIA F, SUN ZH Q,
et al. Manipulation of cracks in three-dimensional colloidal crystal films via recognition of surface energy patterns: an approach to regulating crack patterns and shaping microcrystals[J].
Langmuir, 2011, 27(13): 8018-8026.
doi:10.1021/la2002207
|
[11] |
WU L, DONG ZH CH, KUANG M X,
et al. Printing patterned fine 3D structures by manipulating the three phase contact line[J].
Advanced Functional Materials, 2015, 25(15): 2237-2242.
doi:10.1002/adfm.201404559
|
[12] |
SU M, HUANG ZH D, LI Y F,
et al. A 3D self-shaping strategy for nanoresolution multicomponent architectures[J].
Advanced Materials, 2018, 30(3): 1703963.
doi:10.1002/adma.201703963
|
[13] |
GUO D, LI CH, WANG Y,
et al. Precise assembly of particles for zigzag or linear patterns[J].
Angewandte Chemie International Edition, 2017, 56(48): 15348-15352.
doi:10.1002/anie.201709115
|
[14] |
DUO D, ZHENG X, WANG X H,
et al. Formation of multicomponent size-sorted assembly patterns by tunable templated dewetting[J].
Angewandte Chemie International Edition, 2018, 57(49): 16126-16130.
doi:10.1002/anie.201810728
|
[15] |
GUO D, LI Y N, ZHENG X,
et al. Programmed coassembly of one-dimensional binary superstructures by liquid soft confinement[J].
Journal of the American Chemical Society, 2018, 140(1): 18-21.
doi:10.1021/jacs.7b09738
|
[16] |
SU M, QIN F F, ZHANG Z Y,
et al. Non-lithography hydrodynamic printing of micro/nanostructures on curved surfaces[J].
Angewandte Chemie International Edition, 2020, 59(34): 14234-14240.
doi:10.1002/anie.202007224
|
[17] |
CUI L Y, LI Y F, WANG J X,
et al. Fabrication of large-area patterned photonic crystals by ink-jet printing[J].
Journal of Materials Chemistry, 2009, 19(31): 5499-5502.
|
[18] |
邝旻翾, 王京霞, 王利彬, 等. 喷墨打印高精度图案研究进展[J]. 化学学报,2012,70(18):1889-1896.
doi:10.6023/A12050199
KUANG M X, WANG J X, WANG L B,
et al. Research progress of high-precision patterns by directly inkjet printing[J].
Acta Chimica Sinica, 2012, 70(18): 1889-1896. (in Chinese)
doi:10.6023/A12050199
|
[19] |
LIU M J, WANG J X, HE M,
et al. Inkjet printing controllable footprint lines by regulating the dynamic wettability of coalescing ink droplets[J].
ACS Applied Materials&
Interfaces, 2014, 6(16): 13344-13348.
|
[20] |
KUANG M X, WANG J X, BAO B,
et al. Inkjet printing patterned photonic crystal domes for wide viewing-angle displays by controlling the sliding three phase contact line[J].
Advanced Optical Materials, 2014, 2(1): 34-38.
doi:10.1002/adom.201300369
|
[21] |
SHEN W ZH, LI M ZH, YE CH Q,
et al. Direct-writing colloidal photonic crystal microfluidic chips by inkjet printing for label-free protein detection[J].
Lab on a Chip, 2012, 12(17): 3089-3095.
doi:10.1039/c2lc40311k
|
[22] |
HOU J, ZHANG H CH, YANG Q,
et al. Hydrophilic–hydrophobic patterned molecularly imprinted photonic crystal sensors for high-sensitive colorimetric detection of tetracycline[J].
Small, 2015, 11(23): 2738-2742.
doi:10.1002/smll.201403640
|
[23] |
HOU J, ZHANG H CH, YANG Q,
et al. Bio-inspired photonic-crystal microchip for fluorescent ultratrace detection[J].
Angewandte Chemie International Edition, 2014, 53(23): 5791-5795.
doi:10.1002/anie.201400686
|
[24] |
XIE ZH Y, LI L L, LIU P M,
et al. Self-assembled coffee-ring colloidal crystals for structurally colored contact lenses[J].
Small, 2015, 11(8): 926-930.
doi:10.1002/smll.201402071
|
[25] |
DING H B, ZHU C, TIAN L,
et al. Structural color patterns by electrohydrodynamic jet printed photonic crystals[J].
ACS Applied Materials&
Interfaces, 2017, 9(13): 11933-11941.
|
[26] |
KAWAMURA A, KOHRI M, YOSHIOKA S,
et al. Structural color tuning: mixing melanin-like particles with different diameters to create neutral colors[J].
Langmuir, 2017, 33(15): 3824-3830.
doi:10.1021/acs.langmuir.7b00707
|
[27] |
WANG Y ZH, WEI C, CONG H L,
et al. Hybrid top-down/bottom-up strategy using superwettability for the fabrication of patterned colloidal assembly[J].
ACS Applied Materials&
Interfaces, 2016, 8(7): 4985-4993.
|
[28] |
ZHANG B, MENG F SH, FENG J G,
et al. Manipulation of colloidal particles in three dimensions via microfluid engineering[J].
Advanced Materials, 2018, 30(22): 1707291.
doi:10.1002/adma.201707291
|
[29] |
黄雪雯, 许升, 赵伟, 等. 聚合物纳米组装体修饰丝网印刷电极构建过氧化氢传感器[J]. 应用化学,2020,37(2):235-241.
HUANG X W, XU S, ZHAO W,
et al. Hydrogen peroxide sensor based on a polymeric self-assembled nanoparticles-modified screen-printed electrode[J].
Chinese Journal of Applied Chemistry, 2020, 37(2): 235-241. (in Chinese)
|
[30] |
孙振龙, 闫顺杰, 周容涛, 等. 基于抗菌肽的智能型抗菌涂层研究进展[J]. 应用化学,2020,37(8):865-876.
SUN Z L, YAN S J, ZHOU R T,
et al. Recent progress in the development of smart coatings based on antimicrobial peptides[J].
Chinese Journal of Applied Chemistry, 2020, 37(8): 865-876. (in Chinese)
|
[31] |
张哲烽, 黄小东, 闻利平. 受荷叶自清洁效应启发的手术服表面改性与防污染性能[J]. 应用化学,2019,36(1):34-40.
ZHANG Z F, HUANG X D, WEN L P. Surface modification and antifouling performance with surgical clothing[J].
Chinese Journal of Applied Chemistry, 2019, 36(1): 34-40. (in Chinese)
|
[32] |
杨正军, 刘博, 黄湃, 等. 多孔聚合物微球孔结构对丙烯催化聚合性能的影响[J]. 应用化学,2020,37(7):746-755.
YANG Z J, LIU B, HUANG P,
et al. Effect of pore structures of porous polymer microspheres on catalytic propylene polymerization[J].
Chinese Journal of Applied Chemistry, 2020, 37(7): 746-755. (in Chinese)
|
[33] |
黄河, 李雅瑜, 郭子砚, 等. 双重响应性生物基自修复凝胶的制备及其性能[J]. 应用化学,2019,36(2):146-154.
HUANG H, LI Y Y, GUO Z Y,
et al. Preparation and properties of dual responsive self-healing bio-based hydrogels[J].
Chinese Journal of Applied Chemistry, 2019, 36(2): 146-154. (in Chinese)
|
[34] |
SHI Y L, FENG X J, YANG R H,
et al. Preparation of superhydrophobic and superoleophilic corn straw fibers oil absorbents and application to the removal of spilled oil from water[J].
Chinese Journal of Applied Chemistry, 2020, 37(7): 793-802.
|