Citation: | OTIENO T, ABOU-El-HOSSEIN K. Effect of cutting parameters on tool wear in diamond turning of new optical aluminium grade[J].Chinese Optics, 2016, 9(5): 579-587.doi:10.3788/CO.20160905.0579 |
[1] |
TANIGUCHI N. Current Status in and future trends of ultra precision machining and ultra-fine processing[J]. Annals of the CIRP, 1983, 32(2):573-82.
doi:10.1016/S0007-8506(07)60185-1
|
[2] |
SCHAUB M, SCHWIEGERLING J, FEST E, et al.. Molded Optics:Design and Manufacture[M]. USA:CRC Press, 2011.
|
[3] |
BEICH W S. Specifying injection-molded plastic optics[J]. Photonics Spectra, 2002, 36(3):127-8.
http://www.photonics.com/Article.aspx?AID=25487
|
[4] |
VANCOLIIE E, XIANGDONG L, LING Y, et al.. Materials selection for durable optical inserts used in plastic lens moulding[R]. SIM Tech, Singapore, 2000, DD/00/009/OTC.
|
[5] |
ZHANG L, JIANG Y, MA Z, et al.Effect of cooling rate on solidified microstructure and mechanical properties of aluminium-A356 alloy[J]. J. Materials Processing Technology, 2008, 207:107-111.
doi:10.1016/j.jmatprotec.2007.12.059
|
[6] |
SALEHI M, DEHGHANI K. Structure and properties of nanostructured aluminum A413 produced by melt spinning compared with ingot microstructure[J]. J. Alloys and Compounds, 2008.457:357-361.
doi:10.1016/j.jallcom.2007.03.117
|
[7] |
KARAKO′SE E, KESKIN M. Structural investigations of mechanical properties of Al based rapidly solidified alloys[J]. Materials & Design, 2011, 32(10):4970-9.
http://www.sciencedirect.com/science/article/pii/S0261306911003931
|
[8] |
RS Alloys Overview:RSP Technology[EB/OL]. [2015-06-01].
http://www.rsp-technology.com.
|
[9] |
Aluminium Alloy 6082 -T6~T651: Aalco Metals Ltd[EB/OL]. [2015-06-01].
http://www.aalco.co.uk.
|
[10] |
Aluminium Alloy 6061 -T6: Aalco Metals Ltd[EB/OL]. [2015-06-01].
http://www.aalco.co.uk.
|
[11] |
ZHONG Z, LEONG M, LIU X. The wear rates and performance of three mold insert materials[J]. Materials & Design, 2011, 32(2):643-648.
http://www.sciencedirect.com/science/article/pii/S0261306910004838
|
[12] |
ABOU-EL-HOSSEIN K, OLUFAYO O, MKOKO Z. Diamond tool wear during ultra-high precision machining of rapidly solidified aluminium RSA 905[J]. Wear, 2013, 302(1):1105-1112.
http://www.sciencedirect.com/science/article/pii/S0043164813000100
|
[13] |
HORST R T, HAAN M D, GUBBELS G, et al.. Diamond turning and polishing tests on new RSP aluminium alloys. Modern Technologies in Space and Ground Based Telescopes and Instrumentation II[C]. Proceedings of the SPIE, Amsterdam, Netherlands, 2012, 8450:84502M-11.
|
[14] |
GUBBELS G P H, VENROOY B W H V, BOSCH A J, et al.. Rapidly solidified aluminium for optical applications. Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation[C]. Proceedings of the SPIE, Marseille, France, 2008, 7018:70183A-9.
|
[15] |
OTIENO T, ABOU-EL-HOSSEIN K, HSU W Y, et al.. Surface roughness when diamond turning RSA 905 optical aluminium.Optical Manufacturing and Testing XI[C], Proceedings of SPIE, San Diego, USA, 2015, 9575:957509-6.
|
[16] |
FERREIRA S L C, BRUNS R E, FERREIRA H S, et al.. Box-Behnken design:an alternative for the optimization of analytical methods[J]. Analytica Chimica Acta, 2007, 597:179-186.
doi:10.1016/j.aca.2007.07.011
|