Citation: | DENG Yong-li, LI Qing, HUANG Xue-jie. Analysis of laser cutting of lithium-ion power battery pole piece[J].Chinese Optics, 2018, 11(6): 974-982.doi:10.3788/CO.20181106.0974 |
[1] |
戴永年, 杨斌, 姚耀春, 等.锂离子电发展状况[J].电池, 2005, 35(6):193-195.
http://d.old.wanfangdata.com.cn/Periodical/dc200503013
DAI Y N, YANG B, YAO Y CH,
et al.. Development status of lit-ion batteries[J].
Battery Bimonthly, 2005, 35(6):193-195.(in Chinese)
http://d.old.wanfangdata.com.cn/Periodical/dc200503013
|
[2] |
朱洪波, 李艳华, 郝明明, 等.基于偏振复用技术的半导体 加工光纤耦合模块[J].光学精密工程, 2013, 21(5):1137-1143.
http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201305007
ZHU B, LI Y H, HAO M M,
et al.. Fiber coupled diode laser module for laser processing by polarization multiplexing[J].
Opt. Precision Eng., 2013, 21(5):1137-1143.(in Chinese)
http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201305007
|
[3] |
刘杰, 杨永强, 苏旭彬, 等.多零件选区 熔化成型效率的优化[J].光学精密工程, 2012, 20(4):699-705.
http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201204003
LIU J, YANG Y Q, SU X B,
et al.. Efficiency optimization of selective laser melting for multi-parts[J].
Opt. Precision Eng., 2012, 20(4):699-705.(in Chinese)
http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201204003
|
[4] |
KAWATAS, SUN H B, TANAKA T,
et al.. Finer features for functional micro devices-micromachines can be created with higher resolution using two-photo absorption[J].
Nature, 2001, 412(6848):697-698.
doi:10.1038/35089130
|
[5] |
LEE D, PATWA R, HERFURTH H,
et al.. High speed remote laser cutting of electrodes for lithium-ion batteries:anode[J].
Journal of Power Sources, 2013, 240:368-380.
doi:10.1016/j.jpowsour.2012.10.096
|
[6] |
刘峰, 王立君, 王玉恒, 等.金属材料表面 耦合系数的反演[J].光学精密工程, 2011, 19(2):421-428.
http://d.old.wanfangdata.com.cn/Conference/7426813
LIU F, WANG L J, WANG Y H,
et al.. Inversion for laser coupling coefficient on metal material surfaces[J].
Opt. Precision Eng., 2011, 19(2):421-428.(in Chinese)
http://d.old.wanfangdata.com.cn/Conference/7426813
|
[7] |
金国藩, 李景镇. 测量学[M].北京:科学出版社, 1998.
JIN G F, LI J ZH.
Laser Metrology[M]. Beijing:Science Press, 1998.(in Chinese)
|
[8] |
陆建, 倪晓武, 贺安之. 与材料相互作用物理学[M].北京:机械工业出版社, 1996.
LU J, NI X W, HE A ZH.
Physics of Interaction Between Laser and Materials[M]. Beijing:Mechanical Industry Press, 1996.(in Chinese)
|
[9] |
LUTEY AHA, FORTUNATO A, ASCARI,
et al.. Laser cutting of lithium iron phosphate battery electrodes:characterization of process efficiency and quality[J].
Optics&
Laser Technology, 2015, 65:164-174.
http://www.sciencedirect.com/science/article/pii/S0030399214002035
|
[10] |
金国藩, 李景镇. 测量学[M].北京:科学出版社, 1998.
JIN G F, LI J ZH.
Laser Metrology[M]. Beijing:Science Press, 1998.(in Chinese)
|
[11] |
浦诺威, 张冬云. 制造工艺:基础、展望和创新应用实例[M].北京:清华大学出版社, 2008.
POPRAWE R, ZHANG D Y.
Lasertechnik Fur Die Fertigung[M]. Beijing:Tsinghua University Press, 2008.(in Chinese)
|
[12] |
陈家璧, 彭润玲. 原理及应用[M].北京:电子工业出版社, 2013.
CHEN J B, PENG R L.
Principle and Application of Laser[M]. Beijing:Electronic Industry Press, 2013.(in Chinese)
|
[13] |
季凌飞, 凌晨, 李秋瑞, 等.皮秒 工程应用研究现状与发展分析[J].机械工程学报, 2014, 50(5):115-126.
http://d.old.wanfangdata.com.cn/Periodical/jxgcxb201405016
JI L F, LING CH, LI Q R,
et al.. Research progress and development of industrial application of pico second laser processing[J].
Journal of Mechanical Engineering, 2014, 50(5):115-126.(in Chinese)
http://d.old.wanfangdata.com.cn/Periodical/jxgcxb201405016
|
[14] |
陈发良, 李东海.基于Fokker-Planck方程的电介质材料短脉冲 破坏机制分析[J].强 和粒子束, 2011, 23(2):334-338.
http://d.old.wanfangdata.com.cn/Periodical/qjgylzs201102011
CHEN F L, LI D H. Mechanism of short-pulse laser induced damage in dielectric based on Fokker-Planck equation[J].
High Power Laser and Particle Beams, 2011, 23(2):334-338. (in Chinese)
http://d.old.wanfangdata.com.cn/Periodical/qjgylzs201102011
|
[15] |
顾理, 孙会来, 于楷, 等.飞秒 微加工的研究进展[J]. 与红外, 2013, 43(1):14-18.
doi:10.3969/j.issn.1001-5078.2013.01.003
GU L, SUN H L, YU K,
et al..Research progress of micro-nanofabrication by femtosecond laser[J].
Laser&
Infrared, 2013, 43(1):14-18.(in Chinese)
doi:10.3969/j.issn.1001-5078.2013.01.003
|
[16] |
HÜTTNER B, ROHR G. On the theory of ps and sub-ps laser pulse interaction with metals:Ⅰ.surface temperature[J].
Applied Surface Science, 1996, 103(3):269-274
doi:10.1016/0169-4332(96)00523-5
|
[17] |
何飞, 程亚.飞秒 微加工: 精密加工领域的新前沿[J].中国 , 2007, 34(5):595-622.
doi:10.3321/j.issn:0258-7025.2007.05.001
HE F, CHENG Y. Femtosecond laser micromachining:frontier in laser precision micromachining[J].
Chinese Journal of Laser, 2007, 34(5):595-622.(in Chinese)
doi:10.3321/j.issn:0258-7025.2007.05.001
|