Citation: | LUO Jing, ZHANG Xiao-hui, HE Xu, YE Lu, ZHANG Tian-yi. Effects of a misaligned photodetector in autocollimators on angle measurements[J].Chinese Optics, 2020, 13(3): 558-567.doi:10.3788/CO.2019-0207 |
[1] |
朱凡. 基于共光路光束漂移测量与同步补偿的 自准直技术[D]. 哈尔滨: 哈尔滨工业大学, 2013.
ZHU F. Laser autocollimation technology based on common-path beam drift measurement and synchronous compensation[D]. Harbin: Harbin Institute of Technology, 2013. (in Chinese)
|
[2] |
黄银国. 自准直微小角度测量基础技术研究[D]. 天津: 天津大学, 2010.
HUANG Y G. Study on micro-angle measuring basic technique of laser autocollimation[D]. Tianjin: Tianjin University, 2010. (in Chinese)
|
[3] |
田留德, 赵建科, 王涛, 等. 测试设备位姿失调对自准直仪法测量圆分度误差的影响[J]. 光学 精密工程,2017,25(9):2267-2276.
doi:10.3788/OPE.20172509.2267
TIAN L D, ZHAO J K, WANG T,
et al. Influence of test equipment pose error on dividing error measurement based on autocollimator[J].
Optics and Precision Engineering, 2017, 25(9): 2267-2276. (in Chinese)
doi:10.3788/OPE.20172509.2267
|
[4] |
杨飞, 安其昌, 张静, 等. 大口径光学系统的镜面视宁度检测[J]. 光学 精密工程,2017,25(10):2572-2579.
doi:10.3788/OPE.20172510.2572
YANG F, AN Q CH, ZHANG J,
et al. Seeing metrology of large aperture mirror of telescope[J].
Optics and Precision Engineering, 2017, 25(10): 2572-2579. (in Chinese)
doi:10.3788/OPE.20172510.2572
|
[5] |
王国名, 劳达宝, 周维虎. 光电自准直经纬仪光学系统设计与公差分析[J]. 与光电子学进展,2017,54(10):102203.
WANG G M, LAO D B, ZHOU W H. Optical system design and tolerance analysis of photoelectric self-collimation theodolite[J].
Laser&
Optoelectronics Progress, 2017, 54(10): 102203. (in Chinese)
|
[6] |
闫钰锋, 吴震, 王洋, 等. 温度变化对自准直仪机械结构的影响[J]. 光学仪器,2017,39(1):41-45.
YAN Y F, WU ZH, WANG Y,
et al. Effect of temperature on mechanical structure of autocollimator[J].
Optical Instruments, 2017, 39(1): 41-45. (in Chinese)
|
[7] |
楼志斌, 赵辉, 刘权, 等. 结合 准直的二维转角动态测量系统[J]. 光学 精密工程,2019,27(3):561-568.
doi:10.3788/OPE.20192703.0561
LOU ZH B, ZHAO H, LIU Q,
et al. Two-dimensional rotation angle dynamic measurement system combining laser collimation[J].
Optics and Precision Engineering, 2019, 27(3): 561-568. (in Chinese)
doi:10.3788/OPE.20192703.0561
|
[8] |
何煦, 杨雪, 李颐, 等. 大口径空间光学望远镜重力卸载点布局优化方法[J]. 光学 精密工程,2018,26(11):2764-2775.
doi:10.3788/OPE.20182611.2764
HE X, YANG X, LI Y,
et al. Gravity compensation optimization algorithm for large aperture spatial optical telescope[J].
Optics and Precision Engineering, 2018, 26(11): 2764-2775. (in Chinese)
doi:10.3788/OPE.20182611.2764
|
[9] |
JUST A, KRAUSE M, PROBST R,
et al. Calibration of high-resolution electronic autocollimators against an angle comparator[J].
Metrologia, 2003, 40(5): 288-294.
doi:10.1088/0026-1394/40/5/011
|
[10] |
GECKELER R D, JUST A. Optimized use and calibration of autocollimators in deflectometry[J].
Proceedings of SPIE, 2007, 6704: 670407.
doi:10.1117/12.732384
|
[11] |
陈颖, 张学典, 逯兴莲, 等. 自准直仪的现状与发展趋势[J]. 光机电信息,2011,28(1):6-9.
doi:10.3788/OMEI20112801.0006
CHEN Y, ZHANG X D, LU X L,
et al. Current situation and development trend of autocollimator[J].
OME Information, 2011, 28(1): 6-9. (in Chinese)
doi:10.3788/OMEI20112801.0006
|
[12] |
赵玉平, 彭川黔, 王劼. 大口径细光束自准直测量系统的误差源分析[J]. 半导体光电,2018,39(3):414-419.
ZHAO Y P, PENG CH Q, WANG J. Analysis of error source for large aperture thin beam auto-collimating measurement system[J].
Semiconductor Optoelectronics, 2018, 39(3): 414-419. (in Chinese)
|
[13] |
欧同庚, 陈志高, 杨博雄, 等. CCD光电自准直仪工作原理及误差源分析[J]. 大地测量与地球动力学,2007,27(S1):98-100.
OU T G, CHEN ZH G, YANG B X,
et al. Operating principle and error source of a new type of CCD photoelectric autocollimator[J].
Journal of Geodesy and Geodynamics, 2007, 27(S1): 98-100. (in Chinese)
|
[14] |
张冬, 王振宏. PSD光电自准直仪工作原理及误差分析[J]. 机械工程师,2014(12):46-47.
doi:10.3969/j.issn.1002-2333.2014.12.019
ZHANG D, WANG ZH H. Operation principle and error analysis of PSD photoelectric autocollimator[J].
Mechanical Engineer, 2014(12): 46-47. (in Chinese)
doi:10.3969/j.issn.1002-2333.2014.12.019
|