车载光电稳定平台外框架优化设计 -

姓名
邮箱
手机号码
标题
留言内容
验证码

车载光电稳定平台外框架优化设计

1.
中国科学院长春光学精密机械与物理研究所,吉林长春 130033;
2.
中国科学院研究生院,北京 100039

详细信息

作者简介:
刘长顺(1982-),男,辽宁丹东人,硕士,研究实习员,主要从事光电对抗设备结构设计方面的研究。 E-mail: lcsnuaa@163.com

中图分类号:V556.5
计量
- 文章访问数:3716
- HTML全文浏览量:446
- PDF下载量:1312
- 被引次数:0
出版历程
- 收稿日期:2011-09-11
- 修回日期:2011-11-21
- 刊出日期:2011-12-25

Optimization design of external border for vehicle opto-electronic stabilized platform

1.
Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China;
2.
Graduate University of Chinese Academy of Sciences, Beijing 100039, China

摘要

摘要:为使车载稳定平台在动态载荷状态下满足系统精度要求,对车载光电稳定平台外框架进行了优化设计。介绍了外框架材料的选择原则与外框架的结构形式;运用UG软件对外框架进行三维建模;采用理论分析与有限元计算相结合的手段,对外框架结构进行了分析与设计;并基于MSC软件进行了仿真校核。结果表明:本文设计的外框架能在满足刚度强度的前提下实现较小的转动惯量,静力状态下的最大变形量为2.6 m,满足使用要求。
- 光电稳定平台/
- 外框架/
- 有限元分析
Abstract:An external borner for the vehicle opto-electronic stabilized platform was optimized to improve its system accuracy under a dynamic loading mode. The material choice principle and structure mode of the external bordon were introduced. Then, the external border was molded by using UG software, and its structure was analyzed and designed with the finite element method combined with a theoretical analysis. Based on the MSC software, the model was checked and verified. Experimental results demonstrate that the designed border can achieve a smaller rotation inertia with better rigidity and strength and its maximum distortion is 2.6 m in a static state. The result means that this structure can satisfy the operating request.
- opto-electronic stabilized platform/
- external gumball/
- finite element analysis

HTML全文

参考文献 (1)

[1] 魏颖,张波,李丽, 等 . 基于体系结构的软件可靠性评估[J]. 光学精密工程 ,2010,18(2):485-490. WEI Y,ZHANG B,LI L,et al.. Architecture-based software reliability evaluation[J].Opt. Precision Eng.,2010,18(2):485-490.(in Chinese) [2] 胡新宁,王厚生,王晖,等. 超导转子旋转驱动装置的设计[J]. 光学精密工程 ,2010,18(1):169-174. HU X N,WANG H S,WANG H,et al.. Design of drive device for spinning superconducting rotors[J].Opt. Precision Eng.,2010,18(1):169-174.(in Chinese) [3] 郑猛,冯其波,邵双运, 等 . CR扫描仪扫描光学系统的设计[J]. 光学精密工程 ,2010,18(1):21-27. ZHENG M,FENG Q B,SHAO SH Y,et al.. Design of laser scanning optical systems for computed radiography[J].Opt. Precision Eng.,2010,18(1):21-27.(in Chinese) [4] 李晓韬. 应用惯性冲击原理的非对称夹持式压电旋转驱动器的实验研究[J]. 光学精密工程 ,2010,18(1):156-161. LI X T. Design of asymmetrical rotated piezoelectric actuators based on impact driving principle[J].Opt. Precision Eng.,2010,18(1):156-161.(in Chinese) [5] 陈旭,刘伟奇,康玉思, 等 . 非球面补偿器的结构设计与装调[J]. 光学精密工程 ,2010,18(1):88-93. CHEN X,LIU W Q,KANG Y S,et al.. Design and tolerance analysis of offner compensator[J].Opt. Precision Eng.,2010,18(1):88-93.(in Chinese) [6] 李琳,杨勇. 空间曲线切口式柔性铰的设计[J]. 光学精密工程 ,2010,18(10):2192-2198. LI L,YANG Y. Design of flexure hinges with space curve notches[J].Opt. Precision Eng.,2010,18(10):2192-2198.(in Chinese) [7] 龚雨兵,杨世模,陈志远. 长缝光谱仪主结构的稳健优化设计[J]. 光学精密工程 ,2009,17(11):2638-2645. GONG Y B,YANG SH M,CHEN ZH Y. Robust optimization design of primary structures of long slit spectrometers[J].Opt. Precision Eng.,2009,17(11):2638-2645.(in Chinese) [8] 韩旭,马军,居波,等. 三线阵测绘相机热光学试验交会角测试系统[J]. 光学精密工程 ,2009,17(12):2959-2965. HAN X,MA J,JU B,et al.. Measuring system of space intersection angle for three-line mapping camera in thermal-optical test[J].Opt. Precision Eng.,2009,17(12):2959-2965.(in Chinese) [9] 韩旭,吴清文,董得义,等. 室温硫化胶层建模在透镜结构分析中的应用[J]. 光学精密工程 ,2010,18(1):118-125. HAN X,WU Q W,DONG D Y,et al.. Application of RTV adhesive modeling to structure analysis of reflective mirror[J].Opt. Precision Eng.,2010,18(1):118-125.(in Chinese) [10] 刘强,房建成,韩邦成,等. 磁悬浮飞轮锁紧装置及其优化设计[J]. 光学精密工程 ,2010,18(8):1814-1821. LIU Q,FANG J CH,HAN B CH,et al.. Locking device for magnetic bearing flywheel and its optimization[J].Opt. Precision Eng.,2010,18(8):1814-1821.(in Chinese) [11] 杨洪涛,贾继强. 机载光电平台内框架刚度及模态有限元分析[J]. 计算机仿真 ,2005,22(11):311-314. YANG H T,JIA J Q. Finite element modality and stiffness analysis of airborne electro-optical platform inner-ginbal[J].Computer Simulation,2005,22(11):311-314.(in Chinese) [12] AWAD A N. Investigate the parameters effect on thermogravimetry analysis (TGA) performance for SOx additive in FCC units[J].J. Environmental Sci. Eng.,2010,4(10):44-50.

施引文献

附加信息 (0)

访问统计