MgxZn1-xO thin film and UV detector for solar blind wavelength
-
摘要:考虑ZnO优秀的物理和化学性能以及由于生长温度低而具有更低的缺陷密度从而易于实现高的光电器件效率等特点,本文采用射频磁控溅射和金属有机化学汽相沉积(MOCVD)方法在石英及蓝宝石衬底上生长了立方结构MgZnO薄膜,制备了MgZnO的MSM型紫外探测器。该器件实现了在日盲(太阳盲)波段的光响应,典型的光响应峰值分别在225和250 nm,截止边为230和273 nm。
-
关键词:
- MgZnO薄膜/
- 射频磁控溅射/
- 金属有机化学汽相沉积/
- 日盲紫外探测器
Abstract:MgxZn1-xO is a promising material for developing solarblind ultraviolet(UV) photodetectors. However, the control of the MgZnO quality and the phase separation with increase of Mg in MgxZn1-xOO alloy is still a difficult problem. Up to now, no reports that the cutoff wavelength is at 273 nm have been found for the photodetectors based on MgZnO films. In this paper, cubic MgxZn1-xOO thin films are grown on quartz and sapphire substrates by Radio Frequency(RF) magnetron sputtering and Metal Organic Chemical Vapour Deposition(MOCVD). The MetalSemiconductorMetal(MSM) structured MgZnO photodetectors are fabricated based on the films. Results from spectral analysis shows that the photodetector exhibits a peak response wavelength at 225 nm with a cutoff wavelength of 230 nm, and the cubic phase MgZnO alloy with 255 nm absorption edge is finished by LPMOCVD and the MSM devices exhibit the peak energy at 250 nm with cutoff wavelength of 273 nm, which lies in the solarblind spectrum range(220~280 nm).
点击查看大图
计量
- 文章访问数:5081
- HTML全文浏览量:588
- PDF下载量:2212
- 被引次数:0