标准镜的高精度柔性支撑镜框的优化设计 -

姓名
邮箱
手机号码
标题
留言内容
验证码

标准镜的高精度柔性支撑镜框的优化设计

中国科学院长春光学精密机械与物理研究所,吉林长春 130033

基金项目:

国家科技重大专项02专项(2009ZX02205)

详细信息

中图分类号:TH744.3; TH703
计量
- 文章访问数:4442
- HTML全文浏览量:330
- PDF下载量:1431
- 被引次数:0
出版历程
- 收稿日期:2011-04-11
- 修回日期:2011-08-13
- 刊出日期:2011-08-25

Optimized design of high precision flexure-support barrel for reference sphere

Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China

摘要

摘要:为了实现干涉仪标准镜中光学元件的高精度定位,设计了一种柔性支撑镜框,研究了该结构的力学模型、结构参数、定位精度和透镜变形。首先,根据材料力学原理将柔性镜框等效为一个弹簧系统;根据力学方程和几何关系,建立了透镜中心位置与柔性结构的挠度之间的二元方程。然后,分析了安装位置、温度、结构参数对透镜位置以及作用力的影响。最后,应用有限元仿真分析了所设计结构的力学性能,并进行对比验证。结果表明,数值仿真分析的结果与有限元仿真结果基本相同,柔性镜框的柔性结构厚度最优值为1.5 mm。该设计方案完全满足干涉仪标准镜对镜框在定位精度、稳定性方面的要求。
- 干涉仪/
- 标准镜/
- 柔性镜框/
- 定位精度/
- 稳定性/
- 有限元分析
Abstract:To achieve the positioning optical components of a reference sphere in a interferometer accurately, a flexure barrel was designed. The mechanical model, structure parameter, positioning accuracy and lens deformation of the structure was studied. Firstly, a spring model system was established based on the principle of material mechanics. According to the mechanical equation and geometry relations, a binary equation of the center position of lens and the flexure's deformation was given. Then, the effects of assemble position, temperature, and structure parameters on the the positions and force of the lens were analyzed. Finally, the mechanical performance of the designed structure was analyzed by using the FEA method. The results indicate that the results of numerical simulation is coincident with that of finite element simulation well, and the best thickness of the flexure barrel is 1.5 mm, which fully meet the requirements of the reference sphere in the interferometer for the positioning accuracy and stability of the lens barrel.
- interferometr/
- reference sphere/
- flexure barrel/
- positioning accuracy/
- stability/
- finite element analysis

HTML全文

参考文献 (1)

[1] 李琳,杨勇. 空间曲线切口式柔性铰链的设计[J]. 光学精密工程 ,2010,18(10):2192-2198. LI L,YANG Y. Design of flexure hinges with space curve notches[J].Opt. Precision Eng., 2010,18(10):2192-2198.(in Chinese) [2] 单云霄,陈长征,刘磊,等. 柔性铰链的有限元法设计与分析[J]. 中国光学与应用光学 ,2010,3(2):146-154. SHAN Y X,CHEN CH ZH,LIU L. design and analysis of flexure hinge by finite element method[J].Chinese J. Opt.Appl. Opt.,2010,3(2):146-151.(in Chinese) [3] VUKOBRATOVICH D. Flexure mounts for high-resolution optical elements[J].SPIE,1988,959:18-36. [4] VUKOBRATOVICH D,FETTERHOFF K A,MYERS J R,et al.. Bonded mounts for small cryogenic optics[J].SPIE,2000,4131:228-239. [5] AHMAD A,HUSE R L. Mounting for high resolution projection lenses:US,4929054 . 1990-05-29. [6] CHRISTOPHER L. Athermal bonded mounts: Incorporating aspect ratio into a closed-form solution[J].SPIE,2007,6665:666503. [7] HOSODA M,PARKS R E,BURGE J H. Vacuum support for a large interferometric reference surface . Tucson:University of Arizona,2010. [8] 秦鹏. 基于全柔性串接式振动系统的高精度动不平衡测量研究 . 上海:上海交通大学 ,2007. QIN P. Research on high accuracy dynamic unbalancing measurement based on fully compliant tandem vibration system .Shanghai:Shanghai Jiao Tong University,2007.(in Chinese) [9] 王忠素,翟岩,梅贵,等. 空间光学遥感器反射镜柔性支撑的设计[J]. 光学精密工程 ,2010,18(8):1833-1841. WANG ZH S,ZHAI Y,MEI G,et al.. Design of flexible support structure of reflector in space remote sensor[J].Opt. Precision Eng.,2010,18(8):1833-1841.(in Chinese) [10] 朱晓明,卢锷. 空间光学仪器结构件的动态特性分析及优化[J]. 光学精密工程 ,1995,3(6):99-106. ZHU X M,LU E. Dynamical behaviors analysis and optimum design for space optical instrument[J].Opt. Precision Eng.,1995,3(6):99-106.(in Chinese)

施引文献

附加信息 (0)

访问统计