Anti-crosstalk techniques for high-speed CCD imaging circuit
-
摘要:为了解决高速CCD成像电路串扰问题,分析了产生串扰的原因,建立了CCD成像电路的串扰模型,提出了有效的抗串扰技术。对多通道的CCD视频信号采用带状线而非微带线并使用防护布线进行隔离。对多通道的电源供电进行了隔离,设计并采取有效的去耦电容布线方法,降低了寄生电感,避免了由电源公共阻抗引起的串扰。采用统一的地平面,对模拟电路和数字电路进行分区布局,避免了地弹对信号的影响。针对一个串扰较严重的CCD成像电路进行了实验,结果表明:采取上述抗串扰技术后,通道隔离度大于60 dB,有效降低了串扰, 提高了图像质量。Abstract:In order to overcome the crosstalk of a high speed CCD imaging circuit, the reasons of the crosstalk are analyzed and the crosstalk models of CCD imaging circuit are established. The striplines instead of microstrips are used for the multi-channel CCD video signals and the guard lines are used for the striplines to isolate further. To reduce the crosstalk caused by the common impedance of a power supply, the isolated multi-channel power supplies are designed and the effective routing method for decoupling capacitors is used to lower parasitic inductances. The analog and digital parts are layout separately and a whole ground plane is used to reduce the ground bounce. Experiments for a CCD imaging circuit with much severe crosstalk problems are performed by these techniques, results show that the channel isolation is large than 60 dB. The crosstalk is reduced efficiently and the image quality is improved.
-
Key words:
- high speed CCD/
- imaging circuit/
- crosstalk/
- transmission line
-
[1] JANESICK J R.Scientific Charge-Coupled Devices[M]. Bellingham:SPIE Press,2001:714-715. [2] SHARMA R,CHAKRAVARTY T,BHATTACHARYYA A B. Analytical model for optimum signal integrity in PCB interconnects using ground tracks[J].IEEE T. Electromagn. C.,2009,51(1):67-77. [3] SCHUSTER C,FICHTNER W. Parasitic modes on printed circuit boards and their effects on EMC and signal integrity[J].IEEE T. Electromagn. C.,2001,43(4):416-425. [4] 刘学观,江盼盼,郭辉萍,等. 高速数字信号在PCB中的传输特性分析[J]. 电波科学学报 ,2009,24(3):498-500. LIU X G,WANG P P,GUO H P,et al. Transmission characteristics of high-speed digital signal in PCB[J].Chinese J. Radio Sci.,2009,24(3):498-500.(in Chinese) [5] 董刚,杨杨,柴常春,等. 考虑工艺波动的两相邻耦合RC互连串扰噪声估计[J]. 西安电子科技大学学报 ,2010,37(6):1082-1087. DONG G,YANG Y,CAI CH C,et al.. Crosstalk noise estimation of two adjacent RC interconnects with process variations[J].J. Xidian University,2010,37(6):1082-1087.(in Chinese) [6] 安静,武俊峰,吴一辉. 防护带结构参数对耦合微带线间串扰的影响[J]. 武汉理工大学学报 ,2010,32(23):81-84. AN J,WU J F,WU Y H. Influence of the structural parameters of via fences on reducing the crosstalk between coupled microstrip lines[J].J. Wuhan University Technol,,2010,32(23):81-84.(in Chinese) [7] 丁爱萍,金建刚,孙士保. 小波函数在识别PCB串扰信号频率中的应用[J]. 微电子学与计算机 ,2010,27(7):146-148. DING A P,JIN J G,SUN SH B. Applications of wavelet functions in recognizing PCB crosstalk signal frequency[J].Microelectronics Computer,2010,27(7):146-148.(in Chinese) [8] BOGATIN E.Signal Integrity-Simplified[M]. Englewood Cliff,NJ:Prentice Hall,2003. [9] BROOKS D.Signal Integrity Issues and Printed Circuit Board Design[M]. Englewood Cliff,NJ:Prentice Hall,2003. [10] OTT H W.Electromagnetic Compatibility Engineering[M]. Hoboken,NJ:John Wiley & Sons,Inc.,2009. [11] PAOLETTI U,HISAKADO T,WADA O. Analytical calculation of the point-to-point partial inductance of a perfect ground plane .IEEE Workshop on Signal Propagation on Interconnects,Genova,Italy,13-16 May,2007:217-220.
点击查看大图
计量
- 文章访问数:3294
- HTML全文浏览量:431
- PDF下载量:1411
- 被引次数:0