[1] 王广君,田金文,柳健. 成像雷达在飞行器避障过程中的应用[J]. 电波科学学报,2001,16(2):249-251. WANG G J,TIAN J W,LIU J. The application of imaging laser radar in process of flyer avoiding obstacle[J].
Chinese J. Radio Science,2001,16(2):249-251.(in Chinese) [2] 周占宇,陈恩龙. 直升机防撞系统结构构想[J]. 价值工程,2010(9):238-238. ZHOU ZH Y,CHEN E L. The structure conceive of helicopter fender system[J].
Value Engineering,2010(9):238-238.(in Chinese) [3] 郭赞,郭定,杨俊超,等. 直升机座舱显示界面人机工效指标体系评估研究[J]. 电光与控制,2011(5):67-84. GUO Z,GUO D,YANG J CH,
et al.. Study on evaluation index system of helicopter display interface ergonomics[J].
Electronics Optics Control,2011(5):67-84.(in Chinese) [4] 胡育侠,阮友田,屈恒阔,等. 机载 雷达动态图像的姿态修正[J]. 红外与 工程,2006,35(增3):304-308. HU Y X,RUAN Y T,QU H K,
et al.. Adjusting image in helicopter anti-collision laser radar[J].
Infrared Laser Eng.,2006,35(supl3):304-308.(in Chinese) [5] 胡 旺,李志蜀,黄奇. 基于粗糙集和多向差分图像的去噪方法[J]. 小型微型计算机系统,2006,27(12):2341-2345. HU W,LI ZH SH,HUANG Q. Denoising approach based on rough sets theory and multi-directions difference image[J].
Mini-Micro Systems,2006,27(12):2341-2345. (in Chinese) [6] 徐艳国. 直升机防撞雷达关键技术及发展趋势[J]. 现代雷达,2011(2):9-12. XU Y G. Key technologies and development trends of helicopter collision avoidance radar[J].
Modern Radar,2011(2):9-12.(in Chinese) [7] 赵雁雨,曹良才. 头盔显示器技术发展综述[J]. 测试技术学报,2011,25(6):561-562. ZHAO Y Y,CAO L C. A review of the development of helmet mounted display[J].
J. Test and Measurement Technology,2011,25(6):561-562.(in Chinese) [8] 孟庆季,张续严,周凌,等. 机载 3D探测成像系统的关键技术[J]. 中国光学,2011,4(3):213-232. MENG Q J,ZHANG X Y,ZHOU L,
et al.. Key technologies of airborne laser 3D detection imaging system[J].
Chinese Optics,2011,4(3):213-232.(in Chinese) [9] 王广君,田金文,柳健. 成像雷达前视成像仿真及障碍物识别方法研究[J]. 红外与 工程,2001,30(6):462-465. WANG G J,TIAN J W,LIU J. The front-view imaging simulation of imaging laser radar and the obstacles identification approach[J].
Infrared Laser Eng.,2001,30(6):462-465.(in Chinese) [10] 张荣,李旭,李宝柱. 新体制 雷达光纤扫描系统[J]. 红外与 工程,2009,38(5):811-814. ZHANG R,LI X,LI B ZH. New fiber scanner system in ladar[J].
Infrared Laser Eng., 2009,38(5):811-814.(in Chinese)
|